Stratux

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Stratux

Author	Message
Antoine	A Antoine posted 9/1/2016 2:41:23 PM HOT Topic Details Share Topic
A Group: Forum Members Posts: 3, Visits: 1	Hello, I work on Raspberry Pi and ADS-B receivers to feed FR24 and Radarvirtuel and yesterday I discovered the Stratux project. I tested it with Foreflight and could see my local traffics . But I'm flying in Europe and I love SD, is there a way to use Stratux signals with SD ? Or stratux's support can be added in addition of Flarm ? Regards, Antoine
	Reply Like 120
Reply
Fedko	F Fedko posted 10/4/2021 11:14:26 PM Post Details Share Post
F Group: Forum Members Posts: 3, Visits: 0	Hello everyone. I'm quite new to Skydemon - first year of use, as well as very new to Stratux - just finished building a Europe Flarm version. I have a couple of questions, as I wanted to be sure that my Stratux is correctly built and setup. Some questions might seem dumb... but after a couple days of surfing on internet, I was unable to find a clear answer. Would anyone be able to perhaps clarify the following for me? I am currently using the lastest version of Stratux - 1.6r1-eu026. 1) I got nooelec v3 radios - One seems pre-programmed to 1090 Mhz and the second one to 978 Mhz. Do I need to somehow re-program the 978 Mhz unit to 868 Mhz with some SDR software? Or is this somehow done automatically by the Stratux software? 2) Is there any particular order in which the radios need to be connected to the USB ports of the Raspberry Pi? Or any radio can be plugged into any of the two ports, and the Stratux will somehow detect which radio receives on which frequency? Thank you @b3nn0 for your great support on this Stratux EU project. I saw on your Github page that the Stratux Flarm should be connected to Skydemon via the FLARM-NMEA protocol; 3) But is there any difference between "Air Avionics AT-1" and "FLARM via Airconnect"? 4) Should GDL90 protocol be only avoided due to stability issues? Or does it have any eventual advantage over FLARM-NMEA? Also, what power banks are you guys using, and what autonomy do you get? I still didn't buy one, and I read that some may cause interference with the Stratux unit. Thank you very much in advance.
	Reply Like 6

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Hello, I work on Raspberry Pi and ADS-B receivers to feed FR24 and...

Antoine - 9/1/2016 2:41:23 PM

RE: Stratux

Sky Painter - 9/1/2016 3:30:16 PM

Hello Mike, I've heard about Pilotaware a few days ago, but after...

Antoine - 9/2/2016 6:25:07 AM

RE: Stratux

Tim Dawson - 9/5/2016 10:29:30 AM

RE: Stratux

Paul_Sengupta - 12/7/2016 2:55:15 PM

RE: Stratux

piperpa28 - 1/13/2017 11:43:23 AM

How do you change the IP Address on the Raspberry Pi running the...

eight10man - 1/27/2017 8:51:35 AM

You need to login via SSH and change /etc/network/interfaces and...

piperpa28 - 1/27/2017 10:48:19 PM

RE: Stratux

Paul_Sengupta - 1/29/2017 10:45:28 PM

That's correct for GDL-90, if you would use FLARM the stratux ip...

piperpa28 - 1/30/2017 12:00:31 AM

crablab - 3/31/2017 3:59:23 PM

RE: Stratux

Paul_Sengupta - 4/15/2017 11:26:45 AM

DavidC - 8/26/2017 6:04:55 PM

ACW20 - 9/15/2017 7:06:54 PM

Traffic is shown in Avare with recent stratux builds, but not in SD....

neubamat - 10/2/2017 4:35:38 PM

RE: Stratux

Tim Dawson - 10/4/2017 2:48:36 PM

Thanks Tim, that's true. I think the proper way is to equip stratux...

neubamat - 10/4/2017 8:27:16 PM

I’ve installed the usb gps and Adsb dongles from pilot aware into a pi...

rg - 10/5/2017 7:42:08 PM

RE: Stratux

neubamat - 10/6/2017 4:11:06 PM

Can you post a link to the module you purchased?

rg - 10/6/2017 4:15:37 PM

‌Yes, it's a MPU9250 BMP280 10DOF . I bought it from a local/german...

neubamat - 10/6/2017 7:00:56 PM

Hello, I also tried the MPU9250-BMP280 Module. On stratux page, I got...

Telefisch - 10/21/2017 3:53:34 PM

Try Setup - Navigation Options - Other Traffic and increase "Show...

neubamat - 10/23/2017 4:44:50 PM

I would love if this thread could be kept alive, I'm considering...

Viscab - 10/29/2017 7:31:19 PM

Thanks for that Tip, I‌'ll give it a try, next time the weather will...

Telefisch - 10/30/2017 10:12:16 AM

Ok, meanwhile I went flying and was a bit disappointed. I‌ thought,...

Telefisch - 11/7/2017 1:01:45 PM

Have you installed the latest stratux software? And if so have you...

rg - 11/7/2017 1:35:31 PM

Yes, I have installed the MPU9250-BMP280. If Software is at latest...

Telefisch - 11/7/2017 4:42:01 PM

Sorry for coming back to this topic. Can someone confirm that the baro...

TouchTheSky - 4/23/2018 11:34:02 AM

Yes it is.

rg - 4/23/2018 3:28:33 PM

Is there any particular reason for it?

TouchTheSky - 4/23/2018 4:26:33 PM

Without it the GDL90 message only includes GPS altitude and Skydemon...

rg - 4/23/2018 4:46:20 PM

Ok, understood.

TouchTheSky - 4/23/2018 6:17:02 PM

RE: Stratux

Tim Dawson - 11/8/2017 11:40:15 AM

popov - 11/22/2017 12:27:21 PM

www.stratux.me

Telefisch - 11/22/2017 12:47:02 PM

Absolutely, I just started to build a Stratux version for my flying...

TouchTheSky - 1/9/2018 12:04:47 PM

RE: Stratux

TouchTheSky - 1/10/2018 10:41:26 AM

I really like the Stratux solution. Have you implemented a flarm...

rg - 1/10/2018 11:19:16 AM

RE: Stratux

TouchTheSky - 1/10/2018 11:58:03 AM

Its looks to me like someone has created a Flarm based fork of Stratux...

rg - 1/10/2018 12:12:11 PM

‌Indeed. I will try the FLARM fork of Stratux soon with my second SDR...

TouchTheSky - 1/10/2018 12:26:08 PM

Well done Touchthesky!! I‌ just finish building my Stratux (after a...

techie59 - 2/13/2018 8:36:31 PM

RE: Stratux

TouchTheSky - 2/13/2018 9:13:27 PM

Thanks for the tips. It does work very well! A‌ny tips regarding the...

techie59 - 2/19/2018 1:01:33 PM

popov - 2/20/2018 9:27:42 AM

Hi all. After doing the above, to get the Stratux working with flarm...

popov - 2/27/2018 10:18:55 AM

Is there any benefit to that? I'm just using the GDL90 connection from...

rg - 2/27/2018 10:22:47 AM

If you are flying in Europe you will benefit from seeing FLARM...

TouchTheSky - 2/27/2018 10:45:06 AM

Oh wow! I just thought this was a FLARM connection to SD. I hadn't...

rg - 2/27/2018 11:48:35 AM

Just one note: the current FLARM executable produces an (ignorable)...

TouchTheSky - 2/27/2018 10:48:06 AM

Quick question, have you replaced the 978 mhz antenna or are you using...

popov - 2/27/2018 10:50:46 AM

I replaced it with the following: ‌‌...

TouchTheSky - 2/27/2018 11:34:58 AM

Thank you :) T‌his was awesome info!

popov - 2/27/2018 11:43:59 AM

According to Dan Murray, the benefit of the ground plane is...

TouchTheSky - 2/28/2018 7:27:36 AM

G‌ot to ask just to be sure as English is not my native language: D‌o...

popov - 2/28/2018 7:33:28 AM

No, the other way round. It is a risk to use the ground plane.

TouchTheSky - 2/28/2018 8:08:07 AM

Hi from France‌ I have the same problem to install the Flarm software...

xls125martins - 5/13/2018 2:24:06 PM

RE: Stratux

PaulSS - 2/28/2018 10:55:11 AM

Thank you this is very helpful information.

TouchTheSky - 2/28/2018 11:25:37 AM

RE: Stratux

KevinWolters - 3/11/2018 2:05:45 PM

This should work right away if (unlike in Germany) the 978 MHz is used...

TouchTheSky - 3/11/2018 3:22:33 PM

Thanks for your quick reply. W‌hich do you prefer? UAT‌ orFLARM?...

KevinWolters - 3/11/2018 3:52:27 PM

This is no question for me, there is no UAT here in Germany and I’m...

TouchTheSky - 3/11/2018 4:19:57 PM

Today i received my parcel from the USA! :D b‌ut unfortunately i...

KevinWolters - 3/23/2018 10:43:51 PM

I am not an antenna expert. I did however use the above 868MHz antenna...

TouchTheSky - 3/24/2018 5:07:37 AM

KevinWolters - 3/24/2018 9:49:06 AM

The latest FLARM version requires go version 1.10. Therefore you need...

TouchTheSky - 3/25/2018 7:57:03 AM

‌What does this do? Is it a change to the hardware or just software?...

rg - 3/25/2018 3:40:29 PM

It is in fact a change to the EEPROM of the SDRs, therefore it depends...

TouchTheSky - 3/25/2018 5:55:05 PM

Ok. Thanks. So unless you know how to reverse it I’ll need another...

rg - 3/25/2018 5:59:44 PM

Here is a post with some examples how to program two SDRs. ‌...

TouchTheSky - 3/25/2018 8:31:15 PM

RE: Stratux

KevinWolters - 3/25/2018 11:27:05 AM

Are you sure that this plane was sending ADS-B and/or FLARM?...

TouchTheSky - 3/25/2018 11:50:04 AM

RE: Stratux

TouchTheSky - 7/18/2018 8:59:58 AM

Congratulations, TTS, right at the first time I visit this forum I...

xray - 7/29/2018 7:03:53 AM

Richard, Answer 1: Stratux is not transmitting any signal, unlike...

TouchTheSky - 7/29/2018 9:52:15 AM

...both ideas are interesting for me. My transponder does not have...

xray - 7/29/2018 12:33:27 PM

RE: Stratux

Tim Dawson - 7/18/2018 10:50:57 AM

Yes, it does. If you need a device for testing with SD I am more than...

TouchTheSky - 7/18/2018 10:55:22 AM

RE: Stratux

Tim Dawson - 7/18/2018 1:35:21 PM

I agree, this is indeed remarkable. The FLARM decoder code is derived...

TouchTheSky - 7/18/2018 1:42:10 PM

An important update: there will shortly be a new version available,the...

TouchTheSky - 7/21/2018 6:40:14 PM

RE: Stratux

neubamat - 8/21/2018 2:25:28 PM

RE: Stratux

neubamat - 8/21/2018 3:00:01 PM

Is there an easy fix available?

TouchTheSky - 8/21/2018 3:06:14 PM

Probably by shifting the altitude using the difference between gps alt...

neubamat - 8/21/2018 6:13:27 PM

RE: Stratux

neubamat - 8/27/2018 8:00:39 AM

So what you are suggesting in summary is to modify the following:...

TouchTheSky - 8/27/2018 2:34:13 PM

RE: Stratux

neubamat - 8/27/2018 5:57:37 PM

Alright, I will try both changes shortly. I agree that at least for...

TouchTheSky - 8/28/2018 6:19:36 AM

Can you point me to the Stratux source code file where this...

TouchTheSky - 8/31/2018 8:33:29 AM

Yes, that's it. Since I don't have FF... a FF user should verify that...

neubamat - 8/31/2018 10:03:39 AM

Right, so all other EFBs should be working with the default PepperJo...

TouchTheSky - 8/31/2018 10:10:52 AM

RE: Stratux

neubamat - 8/31/2018 1:18:39 PM

You mean like this? subnet 192.168.10.0 netmask 255.255.255.0 {...

TouchTheSky - 8/31/2018 2:33:28 PM

exactly :D

neubamat - 8/31/2018 9:33:31 PM

RE: Stratux

EU001939 - 9/2/2018 9:02:25 AM

A-EFIS </offtopic>

ArnaudC - 10/3/2018 3:44:28 PM

@ArnaudCCan you please contact me via efrenken[at]me.com? I’ve got a...

efrenken - 10/6/2018 10:14:24 AM

RE: Stratux

Tim Dawson - 9/3/2018 11:13:16 AM

RE: Stratux

TouchTheSky - 9/24/2018 7:38:39 PM

Installed everything as indicated, and it works fine (on the ground)...

on5ap - 3/14/2019 12:37:13 AM

RE: Stratux

Rdkraker - 10/5/2018 3:52:46 PM

- in SD under Setup>Third-Party Devices> you should select...

TouchTheSky - 10/5/2018 4:54:33 PM

RE: Stratux

Rdkraker - 10/6/2018 6:11:44 PM

RE: Stratux

Rdkraker - 10/15/2018 6:08:21 AM

Try this:...

TouchTheSky - 10/15/2018 7:57:13 AM

RE: Stratux

on5ap - 3/18/2019 5:19:37 PM

PepperJo‘s v3 image already is based on v1.5, the version info on the...

TouchTheSky - 3/18/2019 5:32:02 PM

RE: Stratux

on5ap - 3/18/2019 7:26:41 PM

RE: Stratux

pilot-byom - 6/15/2019 12:03:17 PM

RE: Stratux

b3nn0 - 6/15/2019 12:41:16 PM

Thx, etched a copy, only bad things I see is the total openly shown...

pilot-byom - 6/15/2019 2:00:46 PM

Thanks for pointing out this fork. I currently own a Stratux...

joey - 7/9/2019 1:10:37 PM

That is correct. The V3 radio will not work for FLARM reception for...

b3nn0 - 7/9/2019 1:20:56 PM

Thank you for confirmation. Can you recommend a working radio (that...

joey - 7/9/2019 1:28:30 PM

I have not tested it personally, but anything RTL-SDR based should...

b3nn0 - 7/9/2019 4:42:58 PM

RE: Stratux

mxb - 7/9/2019 5:01:20 PM

Correct, the picture on top is the V3 that does not seem to be...

joey - 7/9/2019 6:10:56 PM

RE: Stratux

joey - 7/23/2019 3:54:03 PM

Two things, get EU008 as current it is more stable and get the SDR...

pilot-byom - 7/23/2019 5:04:24 PM

RE: Stratux

Cloudwalker - 4/11/2020 3:17:33 PM

I just released my Github repository for Stratux Europe on a Pi4:...

TouchTheSky - 4/11/2020 3:48:58 PM

Thx a lot, that is good news for a next project!! But, all be...

pilot-byom - 4/11/2020 4:39:47 PM

My Pi4 setup with GPS and two NooelecNESDR SMArt v4 SDRs consumes 6W...

TouchTheSky - 4/11/2020 4:44:50 PM

Thank you! great start!

Cloudwalker - 4/11/2020 7:00:04 PM

RE: Stratux

screen - 5/17/2020 5:03:51 PM

Yes

efrenken - 5/18/2020 2:44:51 AM

RE: Stratux

joey - 7/23/2020 7:59:58 PM

RE: Stratux

b3nn0 - 7/24/2020 10:21:43 AM

That worked, thank you! I first tried disabling bearingless targets in...

joey - 7/28/2020 7:26:10 PM

RE: Stratux

Tim Dawson - 7/30/2020 10:59:25 AM

Thank you for that helpful comment. I'm happy to implement something...

b3nn0 - 7/30/2020 1:55:01 PM

What about the Flarm-Mode? Skydemon is able to talk to Air Avionics...

fzahn - 8/3/2020 4:02:37 PM

Yes, that certainly works. I use it too, but it has three drawbacks...

b3nn0 - 8/3/2020 4:37:16 PM

(Posted before I saw B3nn0’s post above. ^^^^^^^^^^ long story -...

Exfirepro - 7/30/2020 2:28:12 PM

Tim, too bad you feel that way. Stratux Europe is the best traffic...

Maverix - 8/3/2020 10:53:14 AM

RE: Stratux

pilot-byom - 9/4/2020 9:55:02 AM

Alignment doesn't matter as long as it is fixed. The Alignment will be...

b3nn0 - 9/4/2020 10:19:50 AM

Thx!

pilot-byom - 9/4/2020 10:25:07 AM

One more question, are FLARM targets shown in the current EU20...

pilot-byom - 9/5/2020 11:05:24 AM

all OGN received protocols will still be green, will be displayed on...

b3nn0 - 9/5/2020 5:41:10 PM

Just for information, I derived one possible reason for the Flarm...

pilot-byom - 9/6/2020 7:12:49 AM

RE: Stratux

pilot-byom - 9/23/2020 1:04:23 PM

RE: Stratux

b3nn0 - 9/23/2020 3:12:12 PM

In this case, I think it is wise to put a disclaimer on the map page...

pilot-byom - 9/24/2020 1:56:24 PM

RE: Stratux

pilot-byom - 10/6/2020 11:00:45 AM

RE: Stratux

177 - 2/8/2021 6:30:20 PM

I works great, there are many folks out using this combination...

TouchTheSky - 2/8/2021 6:41:16 PM

Good to know that, thanks! Can you give me a quick feedback on...

177 - 2/8/2021 10:07:50 PM

1) and 2) are ok 3) this SDR has more functionality than required and...

TouchTheSky - 2/9/2021 6:47:16 AM

RE: Stratux

erchegyia - 8/30/2021 7:17:19 PM

Adam, as one of the Stratux Europe contributors I am certainly happy...

TouchTheSky - 8/31/2021 7:22:13 AM

Thanks a lot for the answer, I'll check the links. Actually, it's a...

erchegyia - 8/31/2021 11:00:32 AM

Ah sorry, did not carefully read your question. Right answer is: you...

TouchTheSky - 8/31/2021 12:17:32 PM

RE: Stratux

Fedko - 10/4/2021 11:14:26 PM

Welcome to the Stratux Community, here some responses: 1) As long as...

TouchTheSky - 10/5/2021 8:56:17 AM

RE: Stratux

erchegyia - 10/6/2021 7:45:41 AM

RE: Stratux

b3nn0 - 10/7/2021 7:26:38 AM

Thanks for the hints, the NMEA protocol looks quite stable for me and...

erchegyia - 11/1/2021 11:01:01 AM

Try to upgrade your suction cup to black ones with 3M glue....

177 - 11/1/2021 2:12:46 PM

RE: Stratux

Fedko - 12/16/2021 8:45:31 PM

I assume you are using the usual antennas so you may try to move them...

TouchTheSky - 12/17/2021 7:02:06 AM

Thank you for you answer. I will register in Slack. In the meantime,...

Fedko - 1/15/2022 2:30:20 PM

This seems like a pretty standard Stratux, no immediate concerns. I...

TouchTheSky - 1/15/2022 4:37:37 PM

and to add some advice - the flat area of the pinkish GPS antenna has...

BJS - 1/15/2022 7:25:41 PM

RE: Stratux

KeiXiD - 2/10/2022 9:48:24 PM

You should be ready to see bearingless targets, maybe the SD traffic...

TouchTheSky - 2/11/2022 6:47:58 AM

This setting was at 12500ft so it should display targets.

KeiXiD - 2/11/2022 12:50:55 PM

One more thought: did you try to enable and use "FLARM Devices" Air...

TouchTheSky - 2/11/2022 1:46:51 PM

That's what he stated in the first question. I have the same settings...

erchegyia - 2/11/2022 1:49:24 PM

To see Bearingless Targets in SD, you must use the FLARM Protocol....

Exfirepro - 2/12/2022 12:43:55 AM

Im pretty sure there were some planes near

KeiXiD - 2/12/2022 1:57:54 AM

I use Flarm with AirConnect but do not use the Setting „Air Avionics“...

KeiXiD - 2/12/2022 1:41:35 AM

Mine is set to 192.168.10.1 and Mode-S-Signals doesn't appear on SD...

Fliy - 10/28/2024 4:39:20 PM

Maybe yes but latest Stratux version supports BLE and works nicely...

TouchTheSky - 10/28/2024 5:27:21 PM

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login

Stratux

Stratux

Merge Selected

Threaded View

Reading This Topic

Login

Explore

Messages

Mentions

Search